SC 1000 Probe module for 4 sensors, 4x mA OUT, Relay, 24V DC

SC 1000 Probe module for 4 sensors, 4x mA OUT, Relay, 24V DC
Produktnr: LXV400.99.ZR121
Pris per st Kontakta oss
Skickas inom 1 vecka

More confidence in your instrument’s performance

Available exclusively on the SC1000, Prognosys predictive diagnostics uses patented multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Many additional versions available on request

The SC1000 Controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

Vad finns i förpackningen

SC1000 Probe Module with installed cards (as requested), Basic User Manual, Without AC Connections or Power Cord

Specifikationer

Analoga utgångar: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
  Up to 12 analog/digital inputs scalable via digital network
Analog Output: One 4-20 mA Output Module
Analogue inputs: No Input Module
Certifieringar : European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Conduit for Relay Connection: Nej
Dimension (H x B x D): 242 mm x 315 mm x 120 mm
Display : ¼ inch VGA graphical backlit TFT color Glas/Glas-Touch screen, high resistance 320 x 240 pixels
Displayupplösning: Pixel, 256 färgers glas/glas-pekskärm levereras med display-modul
Displayvisningsområde: 11.4 x 8.6 cm
Elektriska certifieringar: CE 2006/95/EC, EMV 2004/108/EC, TUV-GS EN61010-1, DIN EN 61327
Garanti : 24 månader
Givares: 4
Ingångar: Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Kapslingsklass: IP65
Kommunikation: Modbus (RS485): Advanced communications/networking with PLC or SCADA system directly from analyser
Profibus DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Kommunikationsmöjligheter: Ingen
Lagringsförhållanden: -20 - 70 °C / 0 - 95% relative humidity, non-condensing
Larm: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Material: ABS (display module) and metal (probe module) enclosure with corrosion resistant finish
Matningsalternativ: 24V DC, ingen matningskabel
Monteringsform: Yta, panel och rör (horisontellt och vertikalt) med solskydd som tillval
Omgivningstemperatur: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Prognosys: Nej
Reläer: 4 Relays
RTC Module: Nej
Utgång : Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
  Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Vad ingår i leveransen: SC1000 Probe Module with installed cards (as requested), Basic User Manual, Without AC Connections or Power Cord
Vikt : Approximately 6.5 kg (depending on configuration)