Hach’s Inductive Conductivity Sensors measure 200 up to 2,000,000 microSiemens/cm. A built-in Pt 1000 RTD compensates the measured conductivity for changes in process temperature.
Konstruktion som kräver endast lite underhåll
The inductive sensor design eliminates polarization and electrode coating problems that commonly affect conventional contacting electrode-type conductivity sensors.
Många monteringssätt
Sensors can be installed using a choice of four mounting styles—immersion, insertion, union, and sanitary.
Funktionsprincip
Inductive conductivity sensors induce a low current in a closed loop of solution, then measure the magnitude of this current to determine the solution’s conductivity. The conductivity analyzer drives Toroid A, inducing an alternating current in the solution. This current signal flows in a closed loop through the sensor bore and surrounding solution. Toroid B senses the magnitude of the induced current which is proportional to the conductance of the solution. The analyzer processes this signal and displays the corresponding reading.
Tål tuffa miljöer
The inductive sensor is available in sanitary (CIP) flange style and convertible styles in PFA, polypropylene, PEEK, and PVDF material. Select sensors can withstand high pressures and temperatures.
Vad finns i förpackningen
Includes: sensor with cable, digital gateway, extension cable and manual
Specifikationer
Cellkonstant k:4.44 cm-1
Flöde:Max. 3 m/s
Fuktade material:Polypropylene (PP)
Garanti :24 månader
Givartyp:Digital
Kabellängd:6 m fast kabel + 1 m digital kabel
Längd:127 mm
Material:Polypropylen (PP)
Mätområde:200 µS/cm - 2000 mS/cm
Monteringsform:Sanitary
Neddoppningsdjup:69.85 mm
Omgivningstemperatur:-10 - 100 °C (givare)
Processanslutning:2 " flänskonstruktion, passar CIP/SIP, med speciallock och EPDM-packning
Specialkommentarer:Komponenter: AD 3700 digital gateway 3705E2T analog induktiv konduktivitetsgivare 1 m digital kabel